Bush Hog 1947 Front End Loader OEM Parts
Bush Hog 1947 Front End Loader Parts: Diagrams, Assemblies & Components
-
Bush Hog
MOUNT KIT 2-7218Model Number: 1947 FRONT END LOADER -
Bush Hog
MOUNT KIT 2-6804Model Number: 1947 FRONT END LOADER -
Bush Hog
MOUNT KIT 2-6543Model Number: 1947 FRONT END LOADER -
Bush Hog
MOUNT KIT 2-5672Model Number: 1947 FRONT END LOADER -
Bush Hog
MOUNT KIT 2-5432Model Number: 1947 FRONT END LOADER -
Bush Hog
MOUNT KIT 2-5356Model Number: 1947 FRONT END LOADER
Bush Hog 1947 Front End Loader FAQs, Specs, Maintenance & Installation Tips
Get maintenance answers, troubleshooting tips, and advice for installation and daily care of your Bush Hog 1947 Front End Loader. Use this guide for routine upkeep, safe operation, and general service recommendations.
Bush Hog 1947 Front End Loader Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| Lubricate grease fittings (all pivot points) | Lubricate | Every 10 hours or daily, whichever comes first | ||
| Inspect hydraulic hoses, fittings, and cylinders for leaks | Inspect | Before each use | Check for signs of fluid leakage | |
| Inspect hydraulic cylinder seals and fittings | Inspect | Before each use | Check for leaks and loose fittings | |
| Loader alignment and mounting hardware | Inspect/Secure | Before installation and periodically | Confirm mounting pins are secured | |
| Hydraulic fluid level (tractor reservoir) | Check | Before each use | Maintain per tractor specifications | |
| Loader paint and finish | Touch up | As needed | Prevent rust and corrosion | |
| General cleaning | Clean | After each use or as needed | Remove dirt and debris |
Quick Jump
Tap a topic to jump to the answer.
- How often should I lubricate the pivot points on the Bush Hog 1947 Front End Loader?
- How do I check for hydraulic leaks on the Bush Hog 1947 Front End Loader?
- How do I attach the Bush Hog 1947 Front End Loader to my tractor?
- How do I bleed air from the hydraulic system after installation?
- What maintenance is required for the hydraulic cylinders?
- How do I store the Bush Hog 1947 Front End Loader when not in use?
- What is the proper procedure for removing the loader from the tractor?
- How do I adjust the bucket level on the Bush Hog 1947 Front End Loader?
- What should I do if the loader will not lift or lowers slowly?
- Are there any safety precautions I should follow when operating the Bush Hog 1947 Front End Loader?
- How do I replace a damaged hydraulic hose?
- What should I do if the loader makes unusual noises during operation?
- How do I maintain the loader’s paint and finish?
How often should I lubricate the pivot points on the Bush Hog 1947 Front End Loader?
Answer: Lubricate all grease fittings every 10 hours of operation or daily, whichever comes first.
How do I check for hydraulic leaks on the Bush Hog 1947 Front End Loader?
Answer: Inspect all hydraulic hoses, fittings, and cylinders for signs of fluid leakage before each use.
How do I attach the Bush Hog 1947 Front End Loader to my tractor?
Answer: Position the loader to align with the tractor mounting brackets, secure all mounting pins, and connect the hydraulic hoses as instructed in the operator’s manual.
How do I bleed air from the hydraulic system after installation?
Answer: Cycle the loader through its full range of motion several times to purge air from the hydraulic lines.
What maintenance is required for the hydraulic cylinders?
Answer: Inspect for leaks, damaged seals, and ensure all fittings are tight before each use.
How do I store the Bush Hog 1947 Front End Loader when not in use?
Answer: Lower the loader to the ground, relieve hydraulic pressure, clean all surfaces, lubricate all grease fittings, and store in a dry location.
What is the proper procedure for removing the loader from the tractor?
Answer: Lower the loader to the ground, relieve hydraulic pressure, disconnect hydraulic hoses, and remove mounting pins as described in the operator’s manual.
How do I adjust the bucket level on the Bush Hog 1947 Front End Loader?
Answer: Use the tractor’s hydraulic controls to tilt the bucket to the desired angle.
What should I do if the loader will not lift or lowers slowly?
Answer: Check hydraulic fluid level, inspect for leaks, and ensure all hydraulic connections are secure.
Are there any safety precautions I should follow when operating the Bush Hog 1947 Front End Loader?
Answer: Keep bystanders away, operate at low speeds, never exceed rated capacities, and always lower the loader to the ground before leaving the tractor.
How do I replace a damaged hydraulic hose?
Answer: Relieve hydraulic pressure, remove the damaged hose, install a new hose, and check for leaks after installation.
What should I do if the loader makes unusual noises during operation?
Answer: Stop operation, inspect for loose or damaged components, and check for adequate lubrication.
How do I maintain the loader’s paint and finish?
Answer: Clean regularly and touch up any scratched or bare metal areas with paint to prevent rust.