Bush Hog 120 09 Rear Mounted Blade OEM Parts
Bush Hog 120 09 Rear Mounted Blade Parts: Diagrams, Assemblies & Components
Bush Hog 120-09 Rear Mounted Blade FAQs, Specs, Maintenance & Installation Tips
Get essential answers about the Bush Hog 120-09 Rear Mounted Blade. Learn about specifications, recommended use, maintenance intervals, and safe operation in one place.
120-09 Rear Mounted Blade Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Grease | SAE multipurpose grease or equivalent | As needed | As needed |
120-09 Rear Mounted Blade Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| All Grease Fittings | Lubricate | Every 8 hours | Use SAE multipurpose grease or equivalent | |
| All Nuts and Bolts | Check for tightness | Every 8 hours | Tighten as required | |
| Painted Surfaces | Inspect and touch up | Every 8 hours | Touch up paint to prevent rust | |
| Pivot Points and Grease Fittings | Lubricate | Every 8 hours |
120-09 Rear Mounted Blade Operating Specifications
| Specification | Value |
|---|---|
| Working Width | 9 ft |
120-09 Rear Mounted Blade Seasonal Storage
- Clean all debris from unit
- Lubricate all grease fittings
- Touch up paint on bare metal to prevent rust
- Store in dry location
120-09 Rear Mounted Blade Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Blade Contact | Presence of bystanders within 300 ft | Keep bystanders at least 300 feet away during operation |
Quick Jump
Tap a topic to jump to the answer.
- What is the working width of the Bush Hog 120-09 Rear Mounted Blade?
- What is the recommended tractor horsepower range for the 120-09 Rear Mounted Blade?
- What category of 3-point hitch is required for the 120-09 Rear Mounted Blade?
- What is the maximum angle adjustment for the blade?
- Can the blade be offset, and if so, by how much?
- What is the maximum tilt adjustment for the blade?
- What is the moldboard height of the 120-09 Rear Mounted Blade?
- What is the moldboard thickness?
- What is the cutting edge thickness?
- What is the cutting edge height?
- What is the recommended procedure for blade lubrication?
- How often should I check the blade for loose bolts or fasteners?
- How do I adjust the angle of the blade?
- Can the blade be reversed for backfilling?
- What is the recommended transport position for the blade?
- What should I do if the blade does not pivot smoothly?
- What type of grease should be used for maintenance?
What is the working width of the Bush Hog 120-09 Rear Mounted Blade?
Answer: The working width of the Bush Hog 120-09 Rear Mounted Blade is 9 feet.
What is the recommended tractor horsepower range for the 120-09 Rear Mounted Blade?
Answer: The recommended tractor horsepower range is 35 to 70 HP.
What category of 3-point hitch is required for the 120-09 Rear Mounted Blade?
Answer: The 120-09 Rear Mounted Blade is compatible with Category I and II 3-point hitches.
What is the maximum angle adjustment for the blade?
Answer: The blade can be angled up to 45° in either direction.
Can the blade be offset, and if so, by how much?
Answer: Yes, the blade can be offset up to 30 inches left or right.
What is the maximum tilt adjustment for the blade?
Answer: The blade can be tilted up to 30° up or down.
What is the moldboard height of the 120-09 Rear Mounted Blade?
Answer: The moldboard height is 17 inches.
What is the moldboard thickness?
Answer: The moldboard thickness is 1/4 inch.
What is the cutting edge thickness?
Answer: The cutting edge thickness is 1/2 inch.
What is the cutting edge height?
Answer: The cutting edge height is 6 inches.
What is the recommended procedure for blade lubrication?
Answer: Lubricate all pivot points with SAE multipurpose grease every 8 hours of operation.
How often should I check the blade for loose bolts or fasteners?
Answer: Check all bolts and fasteners before each use.
How do I adjust the angle of the blade?
Answer: Remove the angle pin, pivot the blade to the desired angle, and reinsert the pin securely.
Can the blade be reversed for backfilling?
Answer: Yes, the blade can be reversed for backfilling operations.
What is the recommended transport position for the blade?
Answer: Raise the blade fully and secure it with the tractor’s 3-point hitch locking mechanism before transport.
What should I do if the blade does not pivot smoothly?
Answer: Inspect for debris or damage at the pivot points and lubricate as recommended.
What type of grease should be used for maintenance?
Answer: Use SAE multipurpose grease for all lubrication points.