Bush Hog 121 09 Rear Mounted Blade OEM Parts
Bush Hog 121 09 Rear Mounted Blade Parts: Diagrams, Assemblies & Components
Bush Hog 121-09 Rear Mounted Blade FAQs, Specs, Maintenance & Installation Tips
Discover answers to common questions about the Bush Hog 121-09 Rear Mounted Blade including operation, maintenance best practices, and specifications to ensure optimal performance and safety.
121-09 Rear Mounted Blade Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Pivot Points & Grease Fittings | Multi-purpose lithium-based grease | N/A | N/A |
121-09 Rear Mounted Blade Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| All grease fittings | Lubricate | Every 8 hours | Use multi-purpose grease | |
| All bolts and nuts | Check tightness | Every 8 hours | Tighten as required | |
| Blade | Inspect for wear or damage | Every 8 hours | Replace if worn or damaged | |
| Painted surfaces | Inspect and touch up | Every 8 hours | Touch up paint to prevent rust | |
| Pivot points & grease fittings | Lubricate | Every 8 hours | Multi-purpose grease | |
| All debris from unit | Clean before storage | Seasonal | ||
| All grease fittings | Lubricate before storage | Seasonal | ||
| Paint on bare metal | Touch up to prevent rust | Seasonal | ||
| Unit | Store in dry location | Seasonal |
121-09 Rear Mounted Blade Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Blade Contact | Bystanders within operating area | Keep bystanders at least 300 feet away during operation |
Quick Jump
Tap a topic to jump to the answer.
- What is the working width of the Bush Hog 121-09 Rear Mounted Blade?
- What is the recommended tractor horsepower range for the 121-09 Rear Mounted Blade?
- What is the weight of the Bush Hog 121-09 Rear Mounted Blade?
- What is the maximum angle adjustment for the blade?
- What is the maximum tilt adjustment for the blade?
- What is the maximum offset adjustment for the blade?
- What category of 3-point hitch is required for the 121-09?
- How often should I grease the pivot points on the blade?
- What type of grease should be used for lubrication?
- Can the blade be reversed for backfilling or pushing material?
- What is the moldboard height of the 121-09 blade?
- What is the moldboard thickness?
- What is the cutting edge thickness?
- What should I do if the blade is not leveling properly?
- Can the blade be used for ditching or grading?
- What should I do if I notice excessive wear on the cutting edge?
What is the working width of the Bush Hog 121-09 Rear Mounted Blade?
Answer: The working width of the Bush Hog 121-09 Rear Mounted Blade is 9 feet (108 inches).
What is the recommended tractor horsepower range for the 121-09 Rear Mounted Blade?
Answer: The recommended tractor horsepower range is 35 to 75 HP.
What is the weight of the Bush Hog 121-09 Rear Mounted Blade?
Answer: The weight is 563 lbs.
What is the maximum angle adjustment for the blade?
Answer: The blade can be angled up to 45° in either direction.
What is the maximum tilt adjustment for the blade?
Answer: The blade can be tilted up to 15° up or down.
What is the maximum offset adjustment for the blade?
Answer: The blade can be offset up to 30 inches left or right.
What category of 3-point hitch is required for the 121-09?
Answer: The 121-09 Rear Mounted Blade is compatible with Category I and II 3-point hitches.
How often should I grease the pivot points on the blade?
Answer: Grease all pivot points every 8 hours of operation or daily, whichever comes first.
What type of grease should be used for lubrication?
Answer: Use a good quality multi-purpose lithium-based grease.
Can the blade be reversed for backfilling or pushing material?
Answer: Yes, the blade can be reversed for backfilling or pushing material.
What is the moldboard height of the 121-09 blade?
Answer: The moldboard height is 17.5 inches.
What is the moldboard thickness?
Answer: The moldboard thickness is 1/4 inch.
What is the cutting edge thickness?
Answer: The cutting edge thickness is 1/2 inch.
What should I do if the blade is not leveling properly?
Answer: Check the tilt adjustment and ensure the blade is properly attached to the 3-point hitch.
Can the blade be used for ditching or grading?
Answer: Yes, the blade is suitable for ditching and grading.
What should I do if I notice excessive wear on the cutting edge?
Answer: Replace the cutting edge as needed and avoid operating on surfaces that cause excessive wear.