Bush Hog 175 09 Rear Mounted Blade OEM Parts
Bush Hog 175 09 Rear Mounted Blade Parts: Diagrams, Assemblies & Components
Bush Hog 175-09 Rear Mounted Blade FAQs, Specs, Maintenance & Installation Tips
Get answers to common questions about the Bush Hog 175-09 Rear Mounted Blade, including specifications, maintenance tips, and operating advice. Proper care helps you get reliable performance season after season.
175-09 Rear Mounted Blade Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| PTO Requirement | Tractor: 60-100 HP | - | - |
| Grease | No. 2 lithium-based (multi-purpose) grease | - | - |
175-09 Rear Mounted Blade Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| All Grease Fittings | Lubricate | 8hr | Use multi-purpose lithium grease (No. 2 lithium-based) | |
| All Bolts and Fasteners | Check tightness | 8hr | Tighten as required | |
| Painted Surfaces | Inspect and touch up | 8hr | Touch up bare metal to prevent rust | |
| Pivot points and cylinder pins | Lubricate | 8hr | Multi-purpose lithium grease |
175-09 Rear Mounted Blade Operating Specifications
| Specification | Value |
|---|---|
| Working Width | 9 ft |
| Cutting Edge Height | 6 in |
| Cutting Edge Thickness | 1/2 in |
| Moldboard Height | 19 in |
| Moldboard Thickness | 1/4 in |
| Maximum Angle Adjustment | 45° (left or right) |
| Maximum Tilt Adjustment | 30° up or down |
| Maximum Offset | 33 in |
| Maximum Transport Width | 9 ft |
| Blade Reversibility | Reversible cutting edge |
| 3-Point Hitch | Category II and III |
175-09 Rear Mounted Blade Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Blade Contact | Bystanders within 300 ft | Keep all bystanders at least 300 feet away during operation |
175-09 Rear Mounted Blade Seasonal Storage
- Clean all debris from the unit
- Lubricate all grease fittings
- Touch up paint on bare metal to prevent rust
- Store in a dry location
Quick Jump
Tap a topic to jump to the answer.
- What is the working width of the Bush Hog 175-09 Rear Mounted Blade?
- What is the recommended tractor horsepower range for the 175-09 Rear Mounted Blade?
- What is the maximum angle adjustment for the blade?
- Can the blade be offset, and if so, by how much?
- What is the maximum tilt adjustment for the blade?
- What category of 3-point hitch is required for the 175-09?
- What is the moldboard height of the blade?
- What is the moldboard thickness?
- How often should the pivot points be lubricated?
- What type of grease should be used for lubrication?
- What is the cutting edge height?
- What is the cutting edge thickness?
- Is the blade reversible?
- Can the blade be operated in reverse?
- What is the maximum transport width of the blade?
- What should I do if the blade does not pivot smoothly?
- How do I adjust the blade angle?
What is the working width of the Bush Hog 175-09 Rear Mounted Blade?
Answer: The working width is 9 feet.
What is the recommended tractor horsepower range for the 175-09 Rear Mounted Blade?
Answer: The recommended tractor horsepower range is 60 to 100 HP.
What is the maximum angle adjustment for the blade?
Answer: The blade can be angled up to 45° in either direction.
Can the blade be offset, and if so, by how much?
Answer: Yes, the blade can be offset up to 33 inches.
What is the maximum tilt adjustment for the blade?
Answer: The blade can be tilted up to 30° up or down.
What category of 3-point hitch is required for the 175-09?
Answer: The blade is compatible with Category II and III 3-point hitches.
What is the moldboard height of the blade?
Answer: The moldboard height is 19 inches.
What is the moldboard thickness?
Answer: The moldboard thickness is 1/4 inch.
How often should the pivot points be lubricated?
Answer: Lubricate all pivot points every 8 hours of operation.
What type of grease should be used for lubrication?
Answer: Use No. 2 lithium-based grease for all lubrication points.
What is the cutting edge height?
Answer: The cutting edge height is 6 inches.
What is the cutting edge thickness?
Answer: The cutting edge thickness is 1/2 inch.
Is the blade reversible?
Answer: Yes, the cutting edge is reversible.
Can the blade be operated in reverse?
Answer: Yes, the blade can be operated in both forward and reverse directions.
What is the maximum transport width of the blade?
Answer: The maximum transport width is 9 feet.
What should I do if the blade does not pivot smoothly?
Answer: Check for debris or damage at the pivot points and ensure all lubrication points are properly greased.
How do I adjust the blade angle?
Answer: Remove the angle adjustment pin, pivot the blade to the desired angle, and reinsert the pin securely.