Bush Hog 176 09 Rear Mounted Blade OEM Parts
Bush Hog 176 09 Rear Mounted Blade Parts: Diagrams, Assemblies & Components
Bush Hog 176-09 Rear Mounted Blade FAQs, Specs, Maintenance & Installation Tips
Find answers to the most common questions about using, maintaining, and getting the best performance from your Bush Hog 176-09 Rear Mounted Blade. This page covers operating adjustments, routine lubrication, and safe handling tips for long-lasting fieldwork.
176-09 Rear Mounted Blade Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Grease (all fittings) | No. 2 lithium grease | As needed | As needed |
176-09 Rear Mounted Blade Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| All Grease Fittings | Lubricate | Every 8 hrs | Use multipurpose or No. 2 lithium grease | |
| All Bolts and Nuts | Check tightness | Every 8 hrs | Tighten as required | |
| Painted Surfaces | Inspect and touch up | Every 8 hrs | Touch up bare metal to prevent rust | |
| Blade | Inspect for wear or damage | Before each use | Replace if needed |
176-09 Rear Mounted Blade Operating Specifications
| Specification | Value |
|---|---|
| Working Width | 9 ft |
| Blades | 1 |
| PTO Tractor Power | 35–80 HP |
176-09 Rear Mounted Blade Seasonal Storage
- Clean all debris from unit
- Lubricate all grease fittings
- Touch up paint on bare metal to prevent rust
- Store in a dry location
176-09 Rear Mounted Blade Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Blade Contact | Bystanders present | Keep bystanders at least 300 feet away during operation |
Quick Jump
Tap a topic to jump to the answer.
- What is the working width of the Bush Hog 176-09 Rear Mounted Blade?
- What is the recommended tractor horsepower range for the 176-09 Rear Mounted Blade?
- What is the maximum tilt adjustment for the blade?
- What is the maximum offset adjustment for the blade?
- What is the maximum angle adjustment for the blade?
- What category of 3-point hitch is required for the 176-09 Rear Mounted Blade?
- What is the recommended maintenance interval for lubricating pivot points?
- What type of lubricant should be used on the pivot points?
- How do I adjust the angle of the blade?
- Can the blade be reversed for backfilling?
- How do I store the blade for the off-season?
- What should I do if the blade will not pivot smoothly?
- How often should I check the blade for wear or damage?
- Can the blade be used for snow removal?
- What safety precautions should be taken during operation?
- How do I replace the cutting edge?
- What should I do if the blade does not maintain its set angle during use?
- Are replacement blades available?
- Can the blade be offset and angled at the same time?
What is the working width of the Bush Hog 176-09 Rear Mounted Blade?
Answer: The working width of the Bush Hog 176-09 Rear Mounted Blade is 9 feet.
What is the recommended tractor horsepower range for the 176-09 Rear Mounted Blade?
Answer: The recommended tractor horsepower range is 50 to 100 HP.
What is the maximum tilt adjustment for the blade?
Answer: The maximum tilt adjustment is 15 inches up or down.
What is the maximum offset adjustment for the blade?
Answer: The maximum offset adjustment is 36 inches left or right.
What is the maximum angle adjustment for the blade?
Answer: The blade can be angled up to 45° in either direction.
What category of 3-point hitch is required for the 176-09 Rear Mounted Blade?
Answer: The blade is compatible with Category II and III 3-point hitches.
What is the recommended maintenance interval for lubricating pivot points?
Answer: Lubricate all pivot points every 8 hours of operation.
What type of lubricant should be used on the pivot points?
Answer: Use No. 2 lithium grease for all pivot points.
How do I adjust the angle of the blade?
Answer: To adjust the angle, remove the angle pin, pivot the blade to the desired position, and reinsert the pin.
Can the blade be reversed for backfilling?
Answer: Yes, the blade can be reversed for backfilling operations.
How do I store the blade for the off-season?
Answer: Clean all debris from the blade, lubricate all grease fittings, touch up paint on bare metal, and store in a dry location.
What should I do if the blade will not pivot smoothly?
Answer: Check for debris or rust at the pivot points and lubricate with No. 2 lithium grease.
How often should I check the blade for wear or damage?
Answer: Inspect the blade for wear or damage before each use.
Can the blade be used for snow removal?
Answer: Yes, the blade can be used for snow removal.
What safety precautions should be taken during operation?
Answer: Keep bystanders away from the work area and operate at a safe speed.
How do I replace the cutting edge?
Answer: Remove the mounting bolts, replace the cutting edge, and reinstall the bolts securely.
What should I do if the blade does not maintain its set angle during use?
Answer: Check that the angle pin is properly inserted and not worn or damaged.
Are replacement blades available?
Answer: Yes, replacement blades are available from Bush Hog dealers.
Can the blade be offset and angled at the same time?
Answer: Yes, the blade can be both offset and angled simultaneously for versatile grading.