Bush Hog 176 10 Rear Mounted Blade OEM Parts
Bush Hog 176 10 Rear Mounted Blade Parts: Diagrams, Assemblies & Components
Bush Hog 176-10 Rear Mounted Blade FAQs, Specs, Maintenance & Installation Tips
Find clear answers on Bush Hog 176-10 rear blade features, operation, and routine lubrication. This guide covers setup, adjustment, and key maintenance tips to help you get the most from your implement.
176-10 Rear Mounted Blade Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Lubrication Grease | No. 2 lithium-based grease | N/A | N/A |
176-10 Rear Mounted Blade Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| All Grease Fittings | Lubricate | Every 8 hours | Use SAE multipurpose or No. 2 lithium-based grease | |
| Blade Moldboard and Frame | Inspect for damage, cracks, or loose bolts | Every 8 hours | Tighten or repair as necessary | |
| Painted Surfaces | Inspect and touch up paint | Every 8 hours | Prevent rust on bare metal | |
| Pivot Points and All Grease Fittings | Lubricate | Every 8 hours | SAE multipurpose grease or equivalent | |
| Seasonal Storage | Clean, lubricate, touch up paint, store dry | End of season | See storage recommendations below |
176-10 Rear Mounted Blade Operating Specifications
| Specification | Value |
|---|---|
| Working Width | 10 ft |
176-10 Rear Mounted Blade Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Bystander Safety | — | Keep bystanders away from the unit during operation |
176-10 Rear Mounted Blade Seasonal Storage
- Clean all debris from unit
- Lubricate all grease fittings
- Touch up paint on bare metal to prevent rust
- Store in dry location
Quick Jump
Tap a topic to jump to the answer.
- What is the working width of the Bush Hog 176-10 Rear Mounted Blade?
- What tractor horsepower is recommended for the 176-10 Rear Mounted Blade?
- What category of 3-point hitch is required for the 176-10?
- What is the maximum angle adjustment for the blade?
- Can the blade be offset?
- What is the maximum tilt adjustment for the blade?
- What is the moldboard height of the 176-10 blade?
- What is the moldboard thickness?
- What type of cutting edge does the blade use?
- How often should the pivot points be lubricated?
- What type of grease should be used for lubrication?
- How do I adjust the blade angle?
- How do I store the blade for the off-season?
- What is the recommended transport position for the blade?
- What should I do if the blade does not pivot smoothly?
- Can the blade be used for snow removal?
- What should I do if the blade will not hold its set angle?
- How do I replace the cutting edge?
- Are replacement cutting edges available?
- Can the blade be reversed for backfilling?
What is the working width of the Bush Hog 176-10 Rear Mounted Blade?
Answer: The working width is 120 inches.
What tractor horsepower is recommended for the 176-10 Rear Mounted Blade?
Answer: The recommended tractor horsepower is 50–100 HP.
What category of 3-point hitch is required for the 176-10?
Answer: The blade is compatible with Category II and III 3-point hitches.
What is the maximum angle adjustment for the blade?
Answer: The blade can be angled up to 45° in either direction.
Can the blade be offset?
Answer: Yes, the blade can be offset up to 30 inches left or right.
What is the maximum tilt adjustment for the blade?
Answer: The blade can be tilted up to 15° up or down.
What is the moldboard height of the 176-10 blade?
Answer: The moldboard height is 19.5 inches.
What is the moldboard thickness?
Answer: The moldboard thickness is 3/8 inch.
What type of cutting edge does the blade use?
Answer: The blade uses a reversible, high-carbon steel cutting edge.
How often should the pivot points be lubricated?
Answer: Lubricate all pivot points every 8 hours of operation.
What type of grease should be used for lubrication?
Answer: Use No. 2 lithium-based grease for all lubrication points.
How do I adjust the blade angle?
Answer: Remove the angle pin, rotate the blade to the desired angle, and reinsert the pin securely.
How do I store the blade for the off-season?
Answer: Clean all debris, lubricate all grease fittings, touch up paint on bare metal, and store in a dry location.
What is the recommended transport position for the blade?
Answer: Raise the blade fully and ensure it is centered behind the tractor during transport.
What should I do if the blade does not pivot smoothly?
Answer: Check for debris or damage at the pivot points and ensure all grease fittings are properly lubricated.
Can the blade be used for snow removal?
Answer: Yes, the blade can be used for snow removal as well as grading and ditching.
What should I do if the blade will not hold its set angle?
Answer: Inspect the angle pin and holes for wear or damage and replace any worn components as needed.
How do I replace the cutting edge?
Answer: Remove the mounting bolts, replace the cutting edge, and securely tighten the bolts.
Are replacement cutting edges available?
Answer: Yes, replacement cutting edges are available from Bush Hog dealers.
Can the blade be reversed for backfilling?
Answer: Yes, the blade can be reversed for backfilling operations.