Bush Hog 20 06 Rear Mounted Blade OEM Parts
Bush Hog 20 06 Rear Mounted Blade Parts: Diagrams, Assemblies & Components
Bush Hog 20-06 Rear Mounted Blade FAQs, Specs, Maintenance & Installation Tips
Get all key Bush Hog 20-06 Blade facts, tips, and upkeep info in one spot. Explore maintenance intervals, safe operation, and adjustment details to help you work efficiently and safely.
20-06 Rear Mounted Blade Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) | Capacity (qt) |
|---|---|---|---|---|
| Grease | No. 2 lithium grease | - | - | - |
20-06 Rear Mounted Blade Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| All grease fittings | Lubricate | 8 hr | Use No. 2 lithium grease | |
| All bolts and nuts | Check tightness | 8 hr | Tighten as required | |
| Painted surfaces | Touch up paint | As needed | Touch up any scratched or worn areas to prevent rust | |
| Pivot points and adjustment mechanisms | Lubricate | 8 hr | Use No. 2 lithium grease |
20-06 Rear Mounted Blade Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Blade Contact | Operation in Progress | Keep bystanders at least 300 feet away during operation |
20-06 Rear Mounted Blade Seasonal Storage
- Clean all debris from unit
- Lubricate all grease fittings
- Touch up paint on bare metal to prevent rust
- Store in dry location
Quick Jump
Tap a topic to jump to the answer.
- What is the working width of the Bush Hog 20-06 Rear Mounted Blade?
- What is the recommended tractor horsepower range for the 20-06 Rear Mounted Blade?
- What is the maximum angle adjustment for the blade?
- Can the blade be offset from the center position?
- What is the maximum tilt adjustment for the blade?
- What category of 3-point hitch is required for the 20-06 Rear Mounted Blade?
- What is the recommended maintenance interval for checking fasteners?
- How often should the blade pivot points be lubricated?
- What type of lubricant should be used on the pivot points?
- Can the blade be reversed for backfilling or grading?
- What should I do if the blade does not pivot smoothly?
- Can the blade be used for snow removal?
- What is the minimum tractor horsepower required to operate the 20-06 Rear Mounted Blade?
- How do I adjust the angle of the blade?
- What should I do if the blade becomes bent or damaged?
- Are replacement cutting edges available for the 20-06 Rear Mounted Blade?
- What safety precautions should be followed during operation?
- What should I do if the blade does not stay in the set position?
- How often should I inspect the blade for wear or damage?
What is the working width of the Bush Hog 20-06 Rear Mounted Blade?
Answer: The working width is 6 feet.
What is the recommended tractor horsepower range for the 20-06 Rear Mounted Blade?
Answer: The recommended tractor horsepower range is 15 to 35 HP.
What is the maximum angle adjustment for the blade?
Answer: The blade can be angled up to 45 degrees in either direction.
Can the blade be offset from the center position?
Answer: Yes, the blade can be offset to the left or right.
What is the maximum tilt adjustment for the blade?
Answer: The blade can be tilted up to 30 degrees.
What category of 3-point hitch is required for the 20-06 Rear Mounted Blade?
Answer: It is designed for Category I 3-point hitches.
What is the recommended maintenance interval for checking fasteners?
Answer: Check all fasteners before each use.
How often should the blade pivot points be lubricated?
Answer: Lubricate the blade pivot points every 8 hours of operation.
What type of lubricant should be used on the pivot points?
Answer: Use general-purpose lithium-based grease.
Can the blade be reversed for backfilling or grading?
Answer: Yes, the blade can be reversed for backfilling or grading operations.
What should I do if the blade does not pivot smoothly?
Answer: Inspect and lubricate the pivot points. Tighten or replace any worn hardware as needed.
Can the blade be used for snow removal?
Answer: Yes, the blade can be used for snow removal.
What is the minimum tractor horsepower required to operate the 20-06 Rear Mounted Blade?
Answer: The minimum tractor horsepower required is 15 HP.
How do I adjust the angle of the blade?
Answer: Remove the angle pin, set the blade to the desired angle, and reinsert the pin securely.
What should I do if the blade becomes bent or damaged?
Answer: Stop operation immediately and replace or repair the damaged component before resuming use.
Are replacement cutting edges available for the 20-06 Rear Mounted Blade?
Answer: Yes, replacement cutting edges are available.
What safety precautions should be followed during operation?
Answer: Keep bystanders at least 300 feet away and always operate at a safe speed.
What should I do if the blade does not stay in the set position?
Answer: Inspect the locking pins and hardware; replace any worn or damaged parts.
How often should I inspect the blade for wear or damage?
Answer: Inspect the blade for wear or damage before each use.