Bush Hog 1206S 6 Ft Rotary Cutter Discontinued OEM Parts
Bush Hog 1206S 6 Ft Rotary Cutter Discontinued Parts: Diagrams, Assemblies & Components
Bush Hog 1206S Rotary Cutter FAQs, Specs, Maintenance & Installation Tips
Find essential maintenance intervals, proper lubrication, and setup/operation troubleshooting for your Land Pride 1206S Rotary Cutter. Protect your equipment and maximize cutting performance with these best-practice tips and answers to common questions.
1206S Rotary Cutter Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Gearbox Oil | SAE 90 EP gear oil | — | — |
1206S Rotary Cutter Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| Gearbox Oil Level | Check | Every 8 hr | Check oil level in gearbox before each use. Add oil as required. | |
| Blade Holder Bolts | Check Torque | Every 8 hr | Check for tightness. | |
| Blade Bolts | Check Torque | Every 8 hr | Check for tightness. | |
| Driveline U-joints | Lubricate | Every 8 hr | Apply No. 2 lithium grease. | |
| Driveline Guard Bearings | Lubricate | Every 8 hr | Apply No. 2 lithium grease. | |
| Tailwheel Fork | Lubricate | Every 8 hr | Apply No. 2 lithium grease. | |
| Check All Bolts and Nuts | Check Tightness | Every 8 hr | Retighten as necessary. | |
| Tailwheel Hub | Lubricate | Every 50 hr | Apply No. 2 lithium grease. | |
| Gearbox Oil | Change | First 50 hr, then every 100 hr | Use SAE 90 EP gear oil. |
1206S Rotary Cutter Operating Specifications
| Specification | Value |
|---|---|
| Working Width | 6 ft |
| Number of Blades | 2 |
| PTO Requirements | 540 rpm, 40-120 HP tractor |
| Blade Spec | 2 at 450 ft-lbs torque |
1206S Rotary Cutter Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Blade Contact | Bystanders present | Keep bystanders at least 300 feet away during operation |
1206S Rotary Cutter Seasonal Storage
- Clean all debris from unit
- Lubricate all grease fittings
- Touch up paint on bare metal to prevent rust
- Store in dry location
Quick Jump
Tap a topic to jump to the answer.
- How often should I check the gearbox oil on the 1206S Rotary Cutter?
- What type of oil should be used in the gearbox of the 1206S Rotary Cutter?
- How frequently should I lubricate the driveline and U-joints?
- What type of grease should be used for lubrication points on the 1206S Rotary Cutter?
- How do I adjust the cutting height on the 1206S Rotary Cutter?
- How often should the blades be inspected for wear or damage?
- What should I do if the cutter vibrates excessively during operation?
- How do I store the 1206S Rotary Cutter for the off-season?
- How do I safely attach the 1206S Rotary Cutter to my tractor?
- What safety precautions should be followed during operation?
- How do I check for proper PTO shaft length?
- What should I do if the PTO shaft makes noise or vibrates?
- How do I replace the blades on the 1206S Rotary Cutter?
- What is the recommended interval for changing the gearbox oil?
- What should I do if the cutter leaves uncut strips of grass?
How often should I check the gearbox oil on the 1206S Rotary Cutter?
Answer: Check the gearbox oil every 8 hours of operation.
What type of oil should be used in the gearbox of the 1206S Rotary Cutter?
Answer: Use SAE 90 EP gear oil in the gearbox.
How frequently should I lubricate the driveline and U-joints?
Answer: Lubricate the driveline and U-joints every 8 hours of operation.
What type of grease should be used for lubrication points on the 1206S Rotary Cutter?
Answer: Use a good quality multi-purpose lithium base grease.
How do I adjust the cutting height on the 1206S Rotary Cutter?
Answer: Cutting height is adjusted by repositioning the rear wheel and the tractor’s 3-point hitch.
How often should the blades be inspected for wear or damage?
Answer: Inspect the blades before each use and replace if damaged or excessively worn.
What should I do if the cutter vibrates excessively during operation?
Answer: Stop the machine and inspect for loose, damaged, or unbalanced blades.
How do I store the 1206S Rotary Cutter for the off-season?
Answer: Clean all debris from the unit, lubricate all grease fittings, touch up paint on bare metal to prevent rust, and store in a dry location.
How do I safely attach the 1206S Rotary Cutter to my tractor?
Answer: Back the tractor up to the cutter, attach the 3-point hitch, secure all pins, and connect the PTO shaft following all safety precautions.
What safety precautions should be followed during operation?
Answer: Keep bystanders at least 300 feet away during operation and never operate without all shields in place.
How do I check for proper PTO shaft length?
Answer: With the cutter attached and in the operating position, ensure the PTO shaft does not bottom out or separate during all movements.
What should I do if the PTO shaft makes noise or vibrates?
Answer: Stop operation, inspect the shaft for damage or lack of lubrication, and correct as needed.
How do I replace the blades on the 1206S Rotary Cutter?
Answer: Remove the blade bolts, replace with new blades, and securely tighten the bolts.
What is the recommended interval for changing the gearbox oil?
Answer: Change the gearbox oil after the first 50 hours and then every 250 hours of operation.
What should I do if the cutter leaves uncut strips of grass?
Answer: Check for dull or damaged blades and replace or sharpen as needed.