Bush Hog 1206Sw 6 Ft Rotary Cutter Discontinued OEM Parts
Bush Hog 1206Sw 6 Ft Rotary Cutter Discontinued Parts: Diagrams, Assemblies & Components
Bush Hog 1206SW Rotary Cutter FAQs, Specs, Maintenance & Installation Tips
Get answers to the most common questions about maintaining and operating your Bush Hog 1206SW rotary cutter. Includes recommended lubrication, maintenance intervals, and important safety tips for reliable performance in the field.
1206SW Rotary Cutter Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Gearbox Oil | SAE 85W-140 gear oil | 10 qt | 2.5 gal |
1206SW Rotary Cutter Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| Gearbox Oil Level | Check oil level in gearbox | Every 8 hr / before each use | ||
| Driveline U-joints | Lubricate - Apply No. 2 lithium grease | Every 8 hr | 4 fittings | |
| Driveline Guard Bearings | Lubricate - Apply No. 2 lithium grease | Every 8 hr | 2 fittings | |
| Tailwheel Fork | Lubricate - Apply No. 2 lithium grease | Every 8 hr | 1 fitting | |
| Blade Bolts | Check torque | Every 8 hr | Retighten as required | |
| Blades | Inspect for damage or excessive wear | Every 8 hr | 63607 | Qty: 2; Torque to 600 ft-lbs |
| Wheel Bearings | Lubricate - Apply No. 2 lithium grease | Every 50 hr | 2 fittings | |
| Gearbox Oil | Change | Every 100 hr | Use SAE 85W-140 gear oil |
1206SW Rotary Cutter Operating Specifications
| Specification | Value |
|---|---|
| Working Width | 120 inches |
| Blades | 2 |
| PTO Speed | 540 rpm |
| Recommended Tractor PTO HP | 40-120 HP |
1206SW Rotary Cutter Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Blade Contact | Bystander proximity | Keep bystanders at least 300 feet away during operation |
1206SW Rotary Cutter Seasonal Storage
- Clean all debris from unit
- Lubricate all grease fittings
- Touch up paint on bare metal to prevent rust
- Store in dry location
Quick Jump
Tap a topic to jump to the answer.
- How often should I check the gearbox oil on the 1206SW Rotary Cutter?
- What type of oil should be used in the gearbox?
- How frequently should I grease the blade spindle bearings?
- What type of grease is recommended for lubrication points?
- How do I store the 1206SW Rotary Cutter for the off-season?
- What should I do if the blades become dull or damaged?
- How do I safely transport the 1206SW Rotary Cutter?
- What safety precautions should I follow when operating the 1206SW Rotary Cutter?
- How do I troubleshoot poor cutting performance?
- What should I do if the gearbox oil appears milky or contaminated?
- What is the recommended procedure for cleaning the 1206SW Rotary Cutter after use?
- What should I do if the PTO shaft vibrates excessively?
How often should I check the gearbox oil on the 1206SW Rotary Cutter?
Answer: Check the gearbox oil every 8 hours of operation.
What type of oil should be used in the gearbox?
Answer: Use SAE 80W-90 gear oil in the gearbox.
How frequently should I grease the blade spindle bearings?
Answer: Grease the blade spindle bearings every 8 hours of operation.
What type of grease is recommended for lubrication points?
Answer: Use No. 2 lithium grease for all lubrication points.
How do I store the 1206SW Rotary Cutter for the off-season?
Answer: Clean all debris from the unit, lubricate all grease fittings, touch up paint on bare metal to prevent rust, and store in a dry location.
What should I do if the blades become dull or damaged?
Answer: Replace or sharpen the blades as needed.
How do I safely transport the 1206SW Rotary Cutter?
Answer: Raise the cutter to the transport position, secure it properly, and ensure all safety guards are in place before moving.
What safety precautions should I follow when operating the 1206SW Rotary Cutter?
Answer: Keep bystanders at least 300 feet away during operation and always follow all safety instructions.
How do I troubleshoot poor cutting performance?
Answer: Check for dull or damaged blades, ensure proper PTO speed, and verify that the cutter is not overloaded.
What should I do if the gearbox oil appears milky or contaminated?
Answer: Drain and replace the gearbox oil with SAE 80W-90 gear oil.
What is the recommended procedure for cleaning the 1206SW Rotary Cutter after use?
Answer: Remove all debris, wash the unit thoroughly, and lubricate all grease fittings.
What should I do if the PTO shaft vibrates excessively?
Answer: Stop operation immediately and inspect the PTO shaft for damage or misalignment.