Bush Hog 1207R 7 Ft Rotary Cutter Discontinued OEM Parts
Bush Hog 1207R 7 Ft Rotary Cutter Discontinued Parts: Diagrams, Assemblies & Components
Bush Hog 1207R Rotary Cutter FAQs, Specs, Maintenance & Installation Tips
Get quick answers about daily maintenance, lubricating points, seasonal storage, and safe operation for your Land Pride/Bush Hog 1207R Rotary Cutter. Use this guide for essential care, troubleshooting tips, and key specifications.
1207R Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Gearbox Oil | SAE 90 EP gear oil | — | — |
1207R Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| Gearbox Oil Level | Check oil level in gearbox | Every 8 hours (daily, before operation) | ||
| Blade Holder Bolts | Check torque | Every 8 hours (daily) | ||
| Blade Bolts | Check torque | Every 8 hours (daily) | ||
| Driveline U-joints | Lubricate (No. 2 lithium grease) | Every 8 hours | 2 fittings | |
| Driveline Guard Bearings | Lubricate (No. 2 lithium grease) | Every 8 hours | 2 fittings | |
| Tailwheel Fork | Lubricate (No. 2 lithium grease) | Every 8 hours | 1 fitting | |
| Blade Carrier | Check for damage/wear | Every 8 hours | Inspect for cracks, bends, or damage | |
| Blades | Check for damage/wear | Every 8 hours | Inspect for cracks, bends, or excessive wear | |
| Tailwheel Hub | Lubricate (No. 2 lithium grease) | Every 50 hours | 1 fitting | |
| Gearbox Oil | Change oil | First change at 100 hours, then every 250 hours | Use SAE 90 EP gear oil |
1207R Operating Specifications
| Specification | Value |
|---|---|
| Working Width | 7 ft |
| Blades | 2 |
| PTO Speed | 540 RPM |
| Tractor PTO Requirement | 35-60 HP |
1207R Seasonal Storage Tips
- Clean all debris from unit
- Lubricate all grease fittings
- Touch up paint on bare metal to prevent rust
- Store in a dry location
1207R Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Blade Contact | N/A | Keep bystanders at least 300 feet away during operation |
Quick Jump
Tap a topic to jump to the answer.
- How often should I check the gearbox oil level on the 1207R Rotary Cutter?
- What type of oil should be used in the gearbox?
- How frequently should the gearbox oil be changed?
- How do I lubricate the driveline and U-joints?
- How often should I grease the tailwheel hub?
- What is the maximum PTO speed for the 1207R Rotary Cutter?
- How do I adjust the cutting height?
- What should I do if the cutter vibrates excessively during operation?
- How do I store the rotary cutter for the off-season?
- What safety precautions should be taken during operation?
- What should I do if the blades do not cut evenly?
- How do I connect the rotary cutter to my tractor?
- What is the proper procedure for replacing blades?
- How do I check for proper driveline length?
- What should I do if the PTO shaft makes noise during operation?
- How do I prevent rust on the rotary cutter?
- What maintenance should be performed before each use?
- What should I do if the tailwheel does not turn freely?
How often should I check the gearbox oil level on the 1207R Rotary Cutter?
Answer: Check the gearbox oil level every 8 hours of operation.
What type of oil should be used in the gearbox?
Answer: Use SAE 90 EP gear oil in the gearbox.
How frequently should the gearbox oil be changed?
Answer: Change the gearbox oil after the first 50 hours, then every 250 hours of operation.
How do I lubricate the driveline and U-joints?
Answer: Lubricate the driveline and U-joints every 8 hours of operation with No. 2 lithium grease.
How often should I grease the tailwheel hub?
Answer: Grease the tailwheel hub every 8 hours of operation.
What is the maximum PTO speed for the 1207R Rotary Cutter?
Answer: The maximum PTO speed is 540 RPM.
How do I adjust the cutting height?
Answer: Adjust the cutting height by repositioning the tailwheel and the tractor’s 3-point hitch.
What should I do if the cutter vibrates excessively during operation?
Answer: Inspect the blades and blade carrier for damage or imbalance, and check for loose hardware.
How do I store the rotary cutter for the off-season?
Answer: Clean all debris from the unit, lubricate all grease fittings, touch up paint on bare metal to prevent rust, and store in a dry location.
What safety precautions should be taken during operation?
Answer: Keep bystanders at least 300 feet away during operation and always operate with all guards and shields in place.
What should I do if the blades do not cut evenly?
Answer: Check for dull or damaged blades and ensure the cutter is level from side to side.
How do I connect the rotary cutter to my tractor?
Answer: Attach the cutter to the tractor’s 3-point hitch and connect the PTO driveline, ensuring all safety shields are in place.
What is the proper procedure for replacing blades?
Answer: Raise the cutter securely, remove the blade bolt and nut, replace the blade, and torque the hardware to the specification in the manual.
How do I check for proper driveline length?
Answer: With the cutter attached and raised, ensure the driveline does not bottom out or separate at maximum and minimum lift positions.
What should I do if the PTO shaft makes noise during operation?
Answer: Lubricate the PTO shaft and check for worn or damaged components.
How do I prevent rust on the rotary cutter?
Answer: Clean debris after each use and touch up paint on any bare metal areas.
What maintenance should be performed before each use?
Answer: Check gearbox oil level, inspect blades and hardware, and lubricate all grease fittings.
What should I do if the tailwheel does not turn freely?
Answer: Inspect for debris or damage and lubricate the tailwheel hub as recommended.