Bush Hog 1207Rw 7 Ft Rotary Cutter Discontinued OEM Parts
Bush Hog 1207Rw 7 Ft Rotary Cutter Discontinued Parts: Diagrams, Assemblies & Components
Bush Hog 1207RW Rotary Cutter FAQs, Specs, Maintenance & Installation Tips
Find Bush Hog 1207RW maintenance intervals, lubrication advice, troubleshooting tips, and storage guidance. This resource covers essential care and safe operation for your rotary cutter.
1207RW Rotary Cutter Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Gearbox Oil | SAE 90 EP gear oil | N/A | N/A |
1207RW Rotary Cutter Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| Gearbox Oil Level | Check | 8hr (before each use) | Maintain oil at bottom of oil level plug hole | |
| Blade Holder Bolt Torque | Check | 8hr (before each use) | ||
| Blade Bolt Torque | Check | 8hr (before each use) | ||
| Driveline U-joints | Lubricate | 8hr | No. 2 lithium grease (2 fittings) | |
| Driveline Guard Bearings | Lubricate | 8hr | No. 2 lithium grease (2 fittings) | |
| Tailwheel Pivot | Lubricate | 8hr | No. 2 lithium grease (1 fitting) | |
| Blade Spindle | Lubricate | 8hr | No. 2 lithium grease (1 fitting) | |
| Tailwheel Hub | Lubricate | 50hr | No. 2 lithium grease (1 fitting) | |
| Gearbox Oil | Change | 100hr (after first 50hr, then every 100hr) | Use SAE 90 EP gear oil |
1207RW Rotary Cutter Operating Specifications
| Specification | Value |
|---|---|
| Working Width | 7 ft |
| Blades | 2 |
| PTO Requirement | 540 rpm |
| Recommended Tractor HP | 35–60 HP |
1207RW Rotary Cutter Seasonal Storage
- Clean all debris from unit
- Lubricate all grease fittings
- Touch up paint on bare metal to prevent rust
- Store in dry location
1207RW Rotary Cutter Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Blade Contact | N/A | Keep bystanders at least 300 feet away during operation |
Quick Jump
Tap a topic to jump to the answer.
- How often should I check the gearbox oil on the Bush Hog 1207RW Rotary Cutter?
- What type of oil should be used in the gearbox of the Bush Hog 1207RW Rotary Cutter?
- How often should I change the gearbox oil in the Bush Hog 1207RW Rotary Cutter?
- How frequently should I grease the blade spindle bearings?
- What type of grease is recommended for the lubrication points?
- How do I store the Bush Hog 1207RW Rotary Cutter for the off-season?
- What should I do if the blades become dull or damaged?
- What should I do if the cutter vibrates excessively during operation?
- How do I troubleshoot poor cutting performance?
- What should I do if oil is leaking from the gearbox?
- Are there any electrical components on the Bush Hog 1207RW Rotary Cutter?
- How often should I inspect the blades for wear or damage?
How often should I check the gearbox oil on the Bush Hog 1207RW Rotary Cutter?
Answer: Check the gearbox oil every 8 hours of operation.
What type of oil should be used in the gearbox of the Bush Hog 1207RW Rotary Cutter?
Answer: Use SAE 90 EP gear oil in the gearbox.
How often should I change the gearbox oil in the Bush Hog 1207RW Rotary Cutter?
Answer: Change the gearbox oil every 250 hours of operation.
How frequently should I grease the blade spindle bearings?
Answer: Grease the blade spindle bearings every 8 hours of operation.
What type of grease is recommended for the lubrication points?
Answer: Use No. 2 lithium base grease for all lubrication points.
How do I store the Bush Hog 1207RW Rotary Cutter for the off-season?
Answer: Clean all debris from the unit, lubricate all grease fittings, touch up paint on bare metal to prevent rust, and store in a dry location.
What should I do if the blades become dull or damaged?
Answer: Sharpen or replace the blades as needed. Always follow safety procedures and refer to the operator’s manual for instructions.
What should I do if the cutter vibrates excessively during operation?
Answer: Stop the machine and inspect for damaged or unbalanced blades, loose bolts, or debris lodged in the cutter. Correct any issues before resuming operation.
How do I troubleshoot poor cutting performance?
Answer: Check for dull or damaged blades, improper PTO speed, or excessive ground speed. Address any issues found.
What should I do if oil is leaking from the gearbox?
Answer: Stop operation, check for loose bolts or damaged seals, and repair as necessary before resuming use.
Are there any electrical components on the Bush Hog 1207RW Rotary Cutter?
Answer: No, there are no electrical components on this implement.
How often should I inspect the blades for wear or damage?
Answer: Inspect the blades before each use and after hitting any obstruction.