Bush Hog 1207S 7 Ft Rotary Cutter Discontinued OEM Parts
Bush Hog 1207S 7 Ft Rotary Cutter Discontinued Parts: Diagrams, Assemblies & Components
Bush Hog 1207S Rotary Cutter FAQs, Specs, Maintenance & Installation Tips
Get answers to the most common questions about operation, maintenance, and troubleshooting for your 1207S Rotary Cutter. This guide covers fluid specs, grease points, seasonal storage, and safe operation. Keep your rotary cutter running safely and efficiently with these essential tips.
1207S Rotary Cutter Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Gearbox Oil | SAE 90 EP gear oil | — | — |
1207S Rotary Cutter Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| Gearbox Oil Level | Check | Every 8 hours | Maintain oil level to bottom of check plug hole | |
| Blade Holder (Stump Jumper) Nut | Check Torque | Every 8 hours | Check tightness of blade holder retaining nut | |
| Blades | Inspect/Sharpen/Replace | Every 8 hours | Inspect for damage and sharpness. Replace if necessary. | |
| Driveline U-joints | Lubricate (No. 2 lithium grease) | Every 8 hours | 2 fittings | |
| Driveline Guard Bearings | Lubricate (No. 2 lithium grease) | Every 8 hours | 2 fittings | |
| Tailwheel Fork Pivot | Lubricate (No. 2 lithium grease) | Every 8 hours | 1 fitting | |
| Deck | Clean | After each use | Remove debris from deck after each use | |
| Tailwheel Hub | Lubricate (No. 2 lithium grease) | Every 50 hours | 1 fitting | |
| Gearbox Oil | Change | First change at 50 hours, then every 250 hours | Use SAE 90 EP gear oil |
1207S Rotary Cutter Operating Specifications
| Specification | Value |
|---|---|
| Working Width | 7 ft |
| Blades | 2 |
| Blade Spec | 63607 (Qty: 2), Torque: 600 ft-lbs (blade bolt nut) |
| PTO Speed | 540 rpm |
| Tractor Power | 30-65 HP |
1207S Rotary Cutter Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Blade Contact | Bystander within 300 ft | Keep bystanders at least 300 feet away during operation |
1207S Rotary Cutter Seasonal Storage Procedure
- Clean all debris from unit
- Lubricate all grease fittings
- Touch up paint on bare metal to prevent rust
- Store in dry location
Quick Jump
Tap a topic to jump to the answer.
- How often should I check the gearbox oil level on the 1207S Rotary Cutter?
- What type of oil should be used in the gearbox of the 1207S Rotary Cutter?
- How often should I change the gearbox oil in the 1207S Rotary Cutter?
- How do I lubricate the blade spindle bearings on the 1207S Rotary Cutter?
- What is the recommended procedure for storing the 1207S Rotary Cutter during the off-season?
- How do I check the blade condition on the 1207S Rotary Cutter?
- What should I do if the 1207S Rotary Cutter vibrates excessively during operation?
- How do I safely transport the 1207S Rotary Cutter on public roads?
- What safety precautions should be taken when operating the 1207S Rotary Cutter?
- How do I troubleshoot poor cutting performance with the 1207S Rotary Cutter?
- What is the proper way to connect the PTO shaft to the tractor for the 1207S Rotary Cutter?
- How do I know if the gearbox oil needs to be topped off?
- What should I do if the blades do not rotate freely on the 1207S Rotary Cutter?
- What should I do if the gearbox is leaking oil?
- What is the recommended maintenance interval for checking all hardware and fasteners on the 1207S Rotary Cutter?
How often should I check the gearbox oil level on the 1207S Rotary Cutter?
Answer: Check the gearbox oil level every 8 hours of operation.
What type of oil should be used in the gearbox of the 1207S Rotary Cutter?
Answer: Use SAE 90 EP gear oil in the gearbox.
How often should I change the gearbox oil in the 1207S Rotary Cutter?
Answer: Change the gearbox oil after the first 50 hours of operation, then every 250 hours thereafter.
How do I lubricate the blade spindle bearings on the 1207S Rotary Cutter?
Answer: Lubricate the blade spindle bearings with No. 2 lithium grease every 8 hours of operation.
What is the recommended procedure for storing the 1207S Rotary Cutter during the off-season?
Answer: Clean all debris from the unit, lubricate all grease fittings, touch up paint on bare metal to prevent rust, and store in a dry location.
How do I check the blade condition on the 1207S Rotary Cutter?
Answer: Inspect blades regularly for wear, cracks, or damage. Replace if necessary.
What should I do if the 1207S Rotary Cutter vibrates excessively during operation?
Answer: Stop the machine and inspect for bent, damaged, or unbalanced blades. Replace or repair as needed.
How do I safely transport the 1207S Rotary Cutter on public roads?
Answer: Ensure the cutter is securely attached, raised to transport position, and use appropriate safety lighting and signage.
What safety precautions should be taken when operating the 1207S Rotary Cutter?
Answer: Keep bystanders at least 300 feet away during operation and always operate with all shields in place.
How do I troubleshoot poor cutting performance with the 1207S Rotary Cutter?
Answer: Check for dull or damaged blades, incorrect cutting height, or excessive ground speed.
What is the proper way to connect the PTO shaft to the tractor for the 1207S Rotary Cutter?
Answer: Ensure the tractor is off, align the PTO shaft with the tractor’s PTO stub, and secure the locking mechanism.
How do I know if the gearbox oil needs to be topped off?
Answer: Check the oil level at the fill plug; oil should be at the bottom of the plug hole.
What should I do if the blades do not rotate freely on the 1207S Rotary Cutter?
Answer: Inspect for debris or damage, and ensure proper lubrication of spindle bearings.
What should I do if the gearbox is leaking oil?
Answer: Inspect seals and gaskets for damage and replace as necessary.
What is the recommended maintenance interval for checking all hardware and fasteners on the 1207S Rotary Cutter?
Answer: Check all hardware and fasteners for tightness every 8 hours of operation.