Woods 1130-2 Post Hole Digger
Woods 1130-2 Post Hole Digger FAQs, Specs, Maintenance & Installation Tips
Find answers to common questions about the Woods 1130-2 Post Hole Digger, including maintenance, lubrication, and safe operation. Stay informed with essential tips for optimal performance and reliability.
1130-2 Post Hole Digger Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Gearbox Oil | SAE 80W-90 gear oil | 1.5 | 0.375 |
1130-2 Post Hole Digger Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| Gearbox Oil | Check oil level; add as required | Every 8 hr | Use SAE 80W-90 gear oil | |
| Auger Point and Cutting Edges | Inspect / Replace | Every 8 hr | Check for wear or damage. Replace as needed. | |
| All Grease Fittings (PTO shaft, U-joints, auger pivot, etc.) |
Lubricate | Every 8 hr | Use No. 2 lithium grease | |
| Hardware (bolts, nuts, pins) | Check / Tighten | Every 8 hr | Check for looseness or missing hardware. Tighten or replace as needed. | |
| Gearbox Oil | Change | First 50 hr, then every 100 hr | Use SAE 80W-90 gear oil | |
| PTO shaft universal joints | Lubricate | Every 8 hr | 2 grease fittings | |
| Auger pivot point | Lubricate | Every 8 hr | 1 grease fitting |
1130-2 Post Hole Digger Operating Specifications
| Specification | Value |
|---|---|
| PTO Requirement | 540 RPM |
| Tractor HP Range | 20-75 HP |
| Weight | 175 lbs |
1130-2 Post Hole Digger Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Auger Contact | Bystanders present | Keep bystanders at least 25 feet away during operation |
| Entanglement | Moving parts | Keep hands, feet, and clothing away from moving parts |
1130-2 Post Hole Digger Seasonal Storage Recommendations
- Clean all debris from unit
- Lubricate all grease fittings
- Touch up paint on bare metal to prevent rust
- Store in dry location
Quick Jump
Tap a topic to jump to the answer.
- What category of tractor hitch is required for the Woods 1130-2 Post Hole Digger?
- What is the recommended PTO speed for operating the 1130-2 Post Hole Digger?
- What type of gearbox oil should be used in the 1130-2 Post Hole Digger?
- How often should the gearbox oil level be checked?
- How often should the gearbox oil be changed?
- What type of grease should be used for lubrication points?
- How often should the PTO shaft be greased?
- How often should the auger pivot points be greased?
- What should I do if the auger will not dig or rotates slowly?
- What maintenance should be performed before seasonal storage?
- What safety precautions should be followed during operation?
- How do I transport the 1130-2 Post Hole Digger safely?
- What should I do if the PTO shaft makes noise or vibrates?
- What should I do if oil leaks from the gearbox?
- How do I check the gearbox oil level?
- What should I do if the auger becomes stuck in the ground?
- Are there any electrical components or batteries on the 1130-2 Post Hole Digger?
What category of tractor hitch is required for the Woods 1130-2 Post Hole Digger?
Answer: The Woods 1130-2 Post Hole Digger is designed for use with Category 1 three-point hitches.
What is the recommended PTO speed for operating the 1130-2 Post Hole Digger?
Answer: The recommended PTO speed for the 1130-2 Post Hole Digger is 540 RPM.
What type of gearbox oil should be used in the 1130-2 Post Hole Digger?
Answer: Use SAE 80W-90 gear oil in the gearbox.
How often should the gearbox oil level be checked?
Answer: Check the gearbox oil level every 8 hours of operation.
How often should the gearbox oil be changed?
Answer: Change the gearbox oil after the first 50 hours of operation, then every 250 hours thereafter.
What type of grease should be used for lubrication points?
Answer: Use No. 2 lithium grease for all lubrication points.
How often should the PTO shaft be greased?
Answer: Grease the PTO shaft every 8 hours of operation.
How often should the auger pivot points be greased?
Answer: Grease the auger pivot points every 8 hours of operation.
What should I do if the auger will not dig or rotates slowly?
Answer: Check for obstructions, ensure the PTO is engaged at 540 RPM, and verify the gearbox oil level is adequate.
What maintenance should be performed before seasonal storage?
Answer: Clean all debris from the unit, lubricate all grease fittings, touch up paint on bare metal to prevent rust, and store in a dry location.
What safety precautions should be followed during operation?
Answer: Keep bystanders at least 300 feet away during operation and never allow anyone near the auger while it is rotating.
How do I transport the 1130-2 Post Hole Digger safely?
Answer: Raise the implement fully, ensure the auger is clear of the ground, and secure the unit before transport.
What should I do if the PTO shaft makes noise or vibrates?
Answer: Stop operation, inspect the PTO shaft for damage or misalignment, and ensure all connections are secure.
What should I do if oil leaks from the gearbox?
Answer: Stop operation and inspect the gearbox for damaged seals or gaskets; repair or replace as necessary.
How do I check the gearbox oil level?
Answer: Remove the oil level plug on the gearbox and ensure oil is at the bottom of the plug hole.
What should I do if the auger becomes stuck in the ground?
Answer: Disengage the PTO, raise the auger slowly, and reverse the tractor carefully to free the auger.
Are there any electrical components or batteries on the 1130-2 Post Hole Digger?
Answer: No, the 1130-2 Post Hole Digger does not have electrical components or batteries.