Woods 1160 Post Hole Digger OEM Parts
Diagrams, Assemblies & OEM Parts for the Woods 1160 Post Hole Digger
Woods 1160 Post Hole Digger FAQs, Specs, Maintenance & Installation Tips
This resource covers the essential details, maintenance requirements, and safe operation tips for the Woods 1160 Post Hole Digger. Designed for reliability and efficient digging, proper care will ensure many years of trouble-free use.
1160 Post Hole Digger Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Gearbox Oil | SAE 80W-90 gear oil | 1.5 | 0.375 |
| Lubrication Grease | No. 2 lithium grease | - | - |
1160 Post Hole Digger Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| Gearbox Oil Level | Check | Every 8 hours | Fill as needed with SAE 80W-90 gear oil | |
| PTO Shaft | Grease | Every 8 hours | Use No. 2 lithium grease | |
| Auger Pivot Points | Grease | Every 8 hours | Use No. 2 lithium grease | |
| Gearbox Oil | Change | After first 50 hours | Then every 250 hours | |
| Gearbox Oil | Change | Every 250 hours | - |
1160 Post Hole Digger Operating Specifications
| Specification | Value |
|---|---|
| Recommended Tractor Horsepower | 20–75 HP |
| 3-Point Hitch Category | Cat 1 & Cat 2 |
| Maximum Auger Diameter | 18 in |
| Maximum Digging Depth | 48 in |
| Recommended PTO Speed | 540 RPM |
Quick Jump
Tap a topic to jump to the answer.
- What is the recommended tractor horsepower range for the Woods 1160 Post Hole Digger?
- What category of 3-point hitch is required for the Woods 1160 Post Hole Digger?
- What is the maximum auger diameter that can be used with the Woods 1160 Post Hole Digger?
- What is the maximum digging depth of the Woods 1160 Post Hole Digger?
- What is the recommended PTO speed for operating the Woods 1160 Post Hole Digger?
- How often should the gearbox oil be checked on the Woods 1160 Post Hole Digger?
- What type of oil should be used in the gearbox of the Woods 1160 Post Hole Digger?
- How much gear oil does the gearbox hold?
- How often should the gearbox oil be changed?
- What type of grease should be used for lubrication points?
- How often should the PTO shaft be greased?
- How often should the auger pivot points be greased?
- How do I store the Woods 1160 Post Hole Digger for the off-season?
- What should I do if the auger will not turn when the PTO is engaged?
- What should I do if the auger does not dig efficiently?
- How do I adjust the down pressure on the Woods 1160 Post Hole Digger?
- Can the Woods 1160 Post Hole Digger be used in rocky or frozen ground?
- What safety precautions should be followed during operation?
- What should I do if oil leaks from the gearbox?
- How do I know if the PTO driveline is at the correct length?
What is the recommended tractor horsepower range for the Woods 1160 Post Hole Digger?
Answer: The recommended tractor horsepower range for the Woods 1160 Post Hole Digger is 20 to 75 HP.
What category of 3-point hitch is required for the Woods 1160 Post Hole Digger?
Answer: The Woods 1160 Post Hole Digger is designed for Category 1 and Category 2 3-point hitches.
What is the maximum auger diameter that can be used with the Woods 1160 Post Hole Digger?
Answer: The maximum auger diameter that can be used is 18 inches.
What is the maximum digging depth of the Woods 1160 Post Hole Digger?
Answer: The maximum digging depth is 48 inches.
What is the recommended PTO speed for operating the Woods 1160 Post Hole Digger?
Answer: The recommended PTO speed is 540 RPM.
How often should the gearbox oil be checked on the Woods 1160 Post Hole Digger?
Answer: The gearbox oil should be checked every 8 hours of operation.
What type of oil should be used in the gearbox of the Woods 1160 Post Hole Digger?
Answer: Use SAE 80W-90 gear oil in the gearbox.
How much gear oil does the gearbox hold?
Answer: The gearbox holds 1.5 quarts of oil.
How often should the gearbox oil be changed?
Answer: The gearbox oil should be changed after the first 50 hours of operation and every 250 hours thereafter.
What type of grease should be used for lubrication points?
Answer: Use No. 2 lithium grease for all lubrication points.
How often should the PTO shaft be greased?
Answer: The PTO shaft should be greased every 8 hours of operation.
How often should the auger pivot points be greased?
Answer: The auger pivot points should be greased every 8 hours of operation.
How do I store the Woods 1160 Post Hole Digger for the off-season?
Answer: Clean all debris from the unit, lubricate all grease fittings, touch up paint on bare metal to prevent rust, and store in a dry location.
What should I do if the auger will not turn when the PTO is engaged?
Answer: Check for obstructions, ensure the PTO shaft is properly connected, and verify that the shear bolt is intact.
What should I do if the auger does not dig efficiently?
Answer: Inspect the auger for worn or damaged cutting edges and replace as needed.
How do I adjust the down pressure on the Woods 1160 Post Hole Digger?
Answer: The Woods 1160 Post Hole Digger does not have a down pressure adjustment; use the weight of the implement and tractor hydraulics for digging.
Can the Woods 1160 Post Hole Digger be used in rocky or frozen ground?
Answer: The implement is not recommended for use in rocky or frozen ground as it may cause damage to the auger or gearbox.
What safety precautions should be followed during operation?
Answer: Keep bystanders at least 25 feet away, never operate without all shields in place, and disengage PTO and shut off tractor before servicing.
What should I do if oil leaks from the gearbox?
Answer: Stop operation, check the oil level, inspect for damaged seals or gaskets, and repair as necessary.
How do I know if the PTO driveline is at the correct length?
Answer: With the post hole digger attached and in the raised position, the PTO driveline should not bottom out or separate.