Woods 114-2 (1958-68) Multi-Spindle Cutter
-
Woods
Height Adjustment Kit For Hydraulic Cylinder AssemblyModel Number: 114-2 (1958-68) -
Woods
Height Adjustment Kit For Hydraulic Cylinder AssemblyModel Number: 114-2 (1958-68)
Woods 114-2 Multi-Spindle Cutter FAQs, Specs, Maintenance & Installation Tips
Get to know the essential operation, maintenance, and troubleshooting details for your Woods 114-2 Multi-Spindle Cutter. Reference this guide for recommended service intervals, lubricant selection, and operational best practices to get the most from your cutter.
114-2 Multi-Spindle Cutter Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Gearbox Oil | SAE 90 EP gear oil (also accept SAE 80W-90 per FAQ) | - | - |
114-2 Multi-Spindle Cutter Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| Gearbox Oil | Check oil level in both gearboxes; add SAE 90 EP gear oil if necessary | Every 8 hours | - | |
| Blade Spindle Bearings | Lubricate - Apply grease until fresh grease appears at seal | Every 8 hours | (2 fittings) | |
| Tail Wheel Hub | Lubricate - Apply grease | Every 8 hours | (1 fitting) | |
| PTO Shaft U-Joints | Lubricate - Apply grease | Every 8 hours | (2 fittings) | |
| Blades | Inspect/Sharpen/Replace | Every 8 hours | Check for damage or dullness; sharpen or replace as needed | |
| Bolts and Fasteners | Check Tightness | Every 8 hours | Check all hardware | |
| Gearbox Oil | Drain and refill with SAE 90 EP gear oil | Every 100 hours | - |
114-2 Multi-Spindle Cutter Operating Specifications
| Specification | Value |
|---|---|
| Working Width | 114 inches |
| Weight | 1550 lbs |
| Blades | 2 |
| PTO Speed Required | 540 rpm |
| Tractor HP Required | 35–60 HP |
114-2 Multi-Spindle Cutter Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Blade Contact | – | Keep bystanders at least 300 feet away during operation |
Quick Jump
Tap a topic to jump to the answer.
- What is the recommended PTO speed for the Woods 114-2 Multi-Spindle Cutter?
- What is the minimum tractor horsepower required to operate the Woods 114-2 Multi-Spindle Cutter?
- What is the cutting width of the Woods 114-2 Multi-Spindle Cutter?
- What is the recommended cutting height for the Woods 114-2 Multi-Spindle Cutter?
- How often should I check the gearbox oil on the Woods 114-2 Multi-Spindle Cutter?
- What type of oil should be used in the gearbox?
- How frequently should the blade spindle bearings be greased?
- What type of grease is recommended for lubrication points?
- What is the maximum forward operating speed for the Woods 114-2 Multi-Spindle Cutter?
- What is the approximate weight of the Woods 114-2 Multi-Spindle Cutter?
- What category of three-point hitch is required for this cutter?
- How many blades does the Woods 114-2 Multi-Spindle Cutter have?
- How do I store the cutter for the off-season?
- What should I do if the cutter vibrates excessively during operation?
- What safety precautions should I take when operating the cutter?
- What should I do if the cutter is not cutting evenly?
- How do I check the oil level in the gearbox?
- What should I do if the gearbox oil appears milky or contaminated?
- How do I know if the PTO driveline is properly installed?
- What is the recommended procedure for cleaning the cutter after use?
- What should I do if the cutter leaves strips of uncut grass?
What is the recommended PTO speed for the Woods 114-2 Multi-Spindle Cutter?
Answer: The recommended PTO speed is 540 RPM.
What is the minimum tractor horsepower required to operate the Woods 114-2 Multi-Spindle Cutter?
Answer: The minimum tractor horsepower required is 35 HP.
What is the cutting width of the Woods 114-2 Multi-Spindle Cutter?
Answer: The cutting width is 120 inches.
What is the recommended cutting height for the Woods 114-2 Multi-Spindle Cutter?
Answer: The recommended cutting height is adjustable from 2 inches to 12 inches.
How often should I check the gearbox oil on the Woods 114-2 Multi-Spindle Cutter?
Answer: Check the gearbox oil every 8 hours of operation.
What type of oil should be used in the gearbox?
Answer: Use SAE 80W-90 gear oil in the gearbox.
How frequently should the blade spindle bearings be greased?
Answer: Grease the blade spindle bearings every 8 hours of operation.
What type of grease is recommended for lubrication points?
Answer: Use No. 2 lithium grease for all lubrication points.
What is the maximum forward operating speed for the Woods 114-2 Multi-Spindle Cutter?
Answer: The maximum forward speed is 5 mph.
What is the approximate weight of the Woods 114-2 Multi-Spindle Cutter?
Answer: The approximate weight is 2,050 lbs.
What category of three-point hitch is required for this cutter?
Answer: The cutter is compatible with Category II three-point hitches.
How many blades does the Woods 114-2 Multi-Spindle Cutter have?
Answer: The cutter has four blades.
How do I store the cutter for the off-season?
Answer: Clean all debris from the unit, lubricate all grease fittings, touch up paint on bare metal to prevent rust, and store in a dry location.
What should I do if the cutter vibrates excessively during operation?
Answer: Check for damaged or unbalanced blades and ensure all fasteners are tight.
What safety precautions should I take when operating the cutter?
Answer: Keep bystanders at least 300 feet away during operation and always use the proper guards and shields.
What should I do if the cutter is not cutting evenly?
Answer: Check for dull or damaged blades and ensure the cutter is level.
How do I check the oil level in the gearbox?
Answer: Remove the oil level plug and ensure oil is at the bottom of the plug hole.
What should I do if the gearbox oil appears milky or contaminated?
Answer: Drain and replace the gearbox oil with clean SAE 80W-90 gear oil.
How do I know if the PTO driveline is properly installed?
Answer: Ensure the PTO driveline is securely attached and all safety shields are in place.
What is the recommended procedure for cleaning the cutter after use?
Answer: Remove all debris, wash with water if necessary, and lubricate all grease fittings.
What should I do if the cutter leaves strips of uncut grass?
Answer: Check for dull or damaged blades and ensure the PTO speed is correct.