Bush Hog 126 Offset Rotary Cutter OEM Parts
Bush Hog 126 Offset Rotary Cutter Parts: Diagrams, Assemblies & Components
Bush Hog 126-Offset Rotary Cutter FAQs, Specs, Maintenance & Installation Tips
Get answers to common questions about using, maintaining, and storing your Bush Hog 126-Offset Rotary Cutter. Learn about recommended fluids, service intervals, and safe operation to keep your rotary cutter performing at its best.
126-Offset Rotary Cutter Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Gearbox Oil | SAE 90 EP gear oil | Refer to dipstick; fill to indicator | Refer to dipstick |
126-Offset Rotary Cutter Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| Gearbox Oil Level | Check | 8 hr / Daily | Check oil level in gearbox daily before operation. | |
| Blade Holder Nut Torque | Check | 8 hr / Daily | ||
| Blade Bolt Torque | Check | 8 hr / Daily | ||
| Driveline U-joints | Lubricate (No. 2 lithium grease) | 8 hr / Daily | 2 fittings | |
| Driveline Guard Bearings | Lubricate (No. 2 lithium grease) | 8 hr / Daily | 2 fittings | |
| Tailwheel Hub | Lubricate (No. 2 lithium grease) | 50 hr | 1 fitting | |
| Wheel Bearings | Lubricate (No. 2 lithium grease) | 100 hr | 2 fittings | |
| Gearbox Oil | Change | 50 hr (first), then every 250 hr | Use SAE 90 EP gear oil |
126-Offset Rotary Cutter Operating Specifications
| Specification | Value |
|---|---|
| Working Width | 5 ft |
| Blades | 2 (Use only genuine Bush Hog blades) |
| PTO Speed Requirement | 540 rpm |
| Recommended Tractor Power | 35–75 HP |
126-Offset Rotary Cutter Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Cutting Blades | Blade Contact | Keep bystanders at least 300 feet away during operation |
126-Offset Rotary Cutter Seasonal Storage
- Clean all debris from unit
- Lubricate all grease fittings
- Touch up paint on bare metal to prevent rust
- Store in dry location
Quick Jump
Tap a topic to jump to the answer.
- How often should I check the gearbox oil on the Bush Hog 126-Offset Rotary Cutter?
- What type of oil should be used in the gearbox?
- How often should I change the gearbox oil?
- How do I check the blade bolts for tightness?
- How often should I lubricate the PTO shaft?
- What type of grease should be used for lubrication points?
- How do I store the cutter for the off-season?
- What should I do if the cutter vibrates excessively during operation?
- How do I connect the cutter to my tractor?
- What should I do if the cutter is not cutting evenly?
- Are there any special break-in procedures for a new Bush Hog 126-Offset Rotary Cutter?
- What should I do if the PTO shaft makes noise during operation?
- How often should I inspect the driveline shields?
- Can the Bush Hog 126-Offset Rotary Cutter be used with all tractor makes?
- What safety precautions should be followed during operation?
How often should I check the gearbox oil on the Bush Hog 126-Offset Rotary Cutter?
Answer: Check the gearbox oil every 8 hours of operation.
What type of oil should be used in the gearbox?
Answer: Use SAE 90 EP gear oil in the gearbox.
How often should I change the gearbox oil?
Answer: Change the gearbox oil after the first 50 hours of operation, then every 500 hours thereafter.
How do I check the blade bolts for tightness?
Answer: Check the blade bolts for tightness every 8 hours of operation.
How often should I lubricate the PTO shaft?
Answer: Lubricate the PTO shaft every 8 hours of operation.
What type of grease should be used for lubrication points?
Answer: Use No. 2 lithium grease for all lubrication points.
How do I store the cutter for the off-season?
Answer: Clean all debris from the unit, lubricate all grease fittings, touch up paint on bare metal to prevent rust, and store in a dry location.
What should I do if the cutter vibrates excessively during operation?
Answer: Check for loose or damaged blades and ensure all fasteners are tight.
How do I connect the cutter to my tractor?
Answer: Attach the cutter to the tractor’s three-point hitch and connect the PTO shaft.
What should I do if the cutter is not cutting evenly?
Answer: Check for dull or damaged blades and ensure the cutter is level from side to side.
Are there any special break-in procedures for a new Bush Hog 126-Offset Rotary Cutter?
Answer: After the first 50 hours, change the gearbox oil and check all bolts for tightness.
What should I do if the PTO shaft makes noise during operation?
Answer: Lubricate the PTO shaft and check for proper alignment.
How often should I inspect the driveline shields?
Answer: Inspect the driveline shields every 8 hours of operation.
Can the Bush Hog 126-Offset Rotary Cutter be used with all tractor makes?
Answer: The cutter is compatible with tractors equipped with a standard three-point hitch and PTO.
What safety precautions should be followed during operation?
Answer: Keep bystanders at least 300 feet away during operation and always follow all safety instructions.