Bush Hog 126 Rotary Cutter OEM Parts
Bush Hog 126 Rotary Cutter Parts: Diagrams, Assemblies & Components
Bush Hog 126 Rotary Cutter FAQs, Specs, Maintenance & Installation Tips
Find the essential maintenance schedule, lubrication points, and operational guidance for your Bush Hog 126 Rotary Cutter. Keep your equipment running smoothly and safely with these commonly asked questions and expert answers.
126 Rotary Cutter Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Gearbox Oil | SAE 90 EP gear oil | N/A | N/A |
126 Rotary Cutter Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| Gearbox Oil Level | Check oil level at the beginning of each day’s use. Add oil as needed. | 8 hr | ||
| Driveline U-joints | Lubricate with No. 2 lithium grease (2 fittings) | 8 hr | ||
| Driveline Guard Bearings | Lubricate with No. 2 lithium grease (2 fittings) | 8 hr | ||
| Tailwheel Hub | Lubricate with No. 2 lithium grease (1 fitting) | 8 hr | ||
| Blade Pivot Bolts | Check blade bolt torque | 8 hr | Tighten to 450 ft-lbs | |
| Blades | Inspect for damage and sharpness. Replace if damaged. | 8 hr | 63607 | Qty: 2; Torque: 450 ft-lbs |
| Machine | Remove debris from deck and driveline guards. | 8 hr | ||
| Gearbox Oil | Change oil after first 100 hours, then every 100 hours | 100 hr | Use SAE 90 EP gear oil |
126 Rotary Cutter Operating Specifications
| Specification | Value |
|---|---|
| PTO Requirement | 540 RPM, 25–40 HP |
| Working Width | 5 ft |
| Number of Blades | 2 |
126 Rotary Cutter Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Blade Contact | N/A | Keep bystanders at least 300 feet away during operation. |
126 Rotary Cutter Seasonal Storage Recommendations
- Clean all debris from unit
- Lubricate all grease fittings
- Touch up paint on bare metal to prevent rust
- Store in dry location
Quick Jump
Tap a topic to jump to the answer.
- What is the recommended PTO horsepower for operating the Bush Hog 126 Rotary Cutter?
- What is the cutting width of the Bush Hog 126 Rotary Cutter?
- What is the recommended cutting height range for the Bush Hog 126 Rotary Cutter?
- What category of three-point hitch is required for the Bush Hog 126 Rotary Cutter?
- What is the maximum PTO speed for the Bush Hog 126 Rotary Cutter?
- How often should the gearbox oil be checked on the Bush Hog 126 Rotary Cutter?
- What type of oil should be used in the gearbox of the Bush Hog 126 Rotary Cutter?
- How often should the blade spindle be greased?
- How often should the driveline U-joints be greased?
- What is the recommended procedure for storing the Bush Hog 126 Rotary Cutter for the season?
- What size material can the Bush Hog 126 Rotary Cutter cut?
- What should I do if the blades become dull or damaged?
- How do I adjust the cutting height on the Bush Hog 126 Rotary Cutter?
- What should I do if the gearbox oil appears milky or contaminated?
- How do I ensure the driveline is properly installed?
- What safety precautions should be taken during operation?
- What should I do if the cutter vibrates excessively during operation?
- What should I do if the PTO shaft is too long or too short?
- How do I identify and correct a leaking gearbox seal?
What is the recommended PTO horsepower for operating the Bush Hog 126 Rotary Cutter?
Answer: The recommended PTO horsepower for the Bush Hog 126 Rotary Cutter is 25 to 40 HP.
What is the cutting width of the Bush Hog 126 Rotary Cutter?
Answer: The cutting width of the Bush Hog 126 Rotary Cutter is 5 feet.
What is the recommended cutting height range for the Bush Hog 126 Rotary Cutter?
Answer: The recommended cutting height range is 1 inch to 9 inches.
What category of three-point hitch is required for the Bush Hog 126 Rotary Cutter?
Answer: The Bush Hog 126 Rotary Cutter requires a Category I three-point hitch.
What is the maximum PTO speed for the Bush Hog 126 Rotary Cutter?
Answer: The maximum PTO speed is 540 RPM.
How often should the gearbox oil be checked on the Bush Hog 126 Rotary Cutter?
Answer: The gearbox oil should be checked every 8 hours of operation.
What type of oil should be used in the gearbox of the Bush Hog 126 Rotary Cutter?
Answer: Use SAE 90 EP gear oil in the gearbox.
How often should the blade spindle be greased?
Answer: The blade spindle should be greased every 8 hours of operation.
How often should the driveline U-joints be greased?
Answer: The driveline U-joints should be greased every 8 hours of operation.
What is the recommended procedure for storing the Bush Hog 126 Rotary Cutter for the season?
Answer: Clean all debris from the unit, lubricate all grease fittings, touch up paint on bare metal to prevent rust, and store in a dry location.
What size material can the Bush Hog 126 Rotary Cutter cut?
Answer: The Bush Hog 126 Rotary Cutter can cut material up to 1 inch in diameter.
What should I do if the blades become dull or damaged?
Answer: Sharpen or replace the blades as needed. Always follow safety procedures when servicing blades.
How do I adjust the cutting height on the Bush Hog 126 Rotary Cutter?
Answer: Adjust the cutting height by changing the position of the rear wheel and the tractor’s three-point hitch.
What should I do if the gearbox oil appears milky or contaminated?
Answer: Drain and replace the gearbox oil immediately if it appears milky or contaminated.
How do I ensure the driveline is properly installed?
Answer: Make sure the driveline is securely attached to both the tractor and the cutter, and that all safety shields are in place.
What safety precautions should be taken during operation?
Answer: Keep bystanders at least 300 feet away, always operate with all shields in place, and never attempt to clear obstructions while the machine is running.
What should I do if the cutter vibrates excessively during operation?
Answer: Stop the machine and inspect for damaged or unbalanced blades, loose hardware, or debris wrapped around the blade carrier.
What should I do if the PTO shaft is too long or too short?
Answer: Adjust the PTO shaft length according to the instructions in the operator’s manual to ensure proper overlap and safe operation.
How do I identify and correct a leaking gearbox seal?
Answer: Inspect the gearbox for leaks, replace the seal if necessary, and refill with the recommended oil.