Bush Hog 160 Rotary Cutter OEM Parts
Bush Hog 160 Rotary Cutter Parts: Diagrams, Assemblies & Components
Bush Hog 160 Rotary Cutter FAQs, Specs, Maintenance & Installation Tips
Get answers to common questions about operating and maintaining your Bush Hog 160 Rotary Cutter. This guide covers routine checks, lubrication schedules, and troubleshooting advice to help you keep your equipment running smoothly.
160 Rotary Cutter Fluid Specifications & Capacities
| Fluid | Specification | Capacity (qt) | Capacity (gal) |
|---|---|---|---|
| Gearbox Oil | SAE 90 EP gear oil | 6 | 1.5 |
160 Rotary Cutter Complete Maintenance Schedule
| Service Item | Action | Interval | Part Number | Notes |
|---|---|---|---|---|
| Gearbox Oil Level | Check oil level in gearbox before each use | Every 8 hrs | ||
| Blade Holder Bolt Torque | Check blade holder bolt torque before each use | Every 8 hrs | ||
| Blade Bolt Torque | Check blade bolt torque before each use | Every 8 hrs | ||
| Driveline U-joints | Apply grease to all driveline U-joints | Every 8 hrs | ||
| Driveline Sliding Tubes | Apply grease to sliding tubes | Every 8 hrs | ||
| Tailwheel Pivot | Apply grease to tailwheel pivot | Every 8 hrs | ||
| Tailwheel Hub | Apply grease to tailwheel hub | Every 50 hrs | ||
| Gearbox Oil | Change oil after first 100 hours, then every 250 hours | First 100 hrs; every 250 hrs after |
160 Rotary Cutter Operating Specifications
| Specification | Value |
|---|---|
| Working Width | 5 ft |
| Blades | 2 |
| PTO Speed | 540 RPM |
| PTO Tractor Requirement | 40-60 HP |
160 Rotary Cutter Operating Warnings
| System | Indicator | Required Action |
|---|---|---|
| Blade Contact | Keep bystanders at least 300 feet away during operation | Ensure area is clear before operating; stop if persons approach |
160 Rotary Cutter Seasonal Storage
- Clean all debris from unit
- Lubricate all grease fittings
- Touch up paint on bare metal to prevent rust
- Store in dry location
Quick Jump
Tap a topic to jump to the answer.
- What is the recommended PTO horsepower for operating the Bush Hog 160 Rotary Cutter?
- What is the cutting width of the Bush Hog 160 Rotary Cutter?
- What is the recommended cutting height range for the Bush Hog 160 Rotary Cutter?
- What is the maximum PTO speed for the Bush Hog 160 Rotary Cutter?
- What category of three-point hitch is required for the Bush Hog 160 Rotary Cutter?
- How often should the gearbox oil be checked or changed?
- What type of oil is recommended for the gearbox?
- How much oil does the gearbox hold?
- How often should the blade spindle be greased?
- What type of grease should be used for lubrication points?
- How do I adjust the cutting height on the Bush Hog 160 Rotary Cutter?
- What is the maximum diameter of material the Bush Hog 160 Rotary Cutter can cut?
- What should I do if the blades become dull or damaged?
- How do I store the Bush Hog 160 Rotary Cutter for the season?
- What is the correct torque specification for blade bolts?
- How do I check the gearbox oil level?
- What should I do if the PTO shaft vibrates excessively?
- What safety precautions should be taken during operation?
What is the recommended PTO horsepower for operating the Bush Hog 160 Rotary Cutter?
Answer: The recommended PTO horsepower for the Bush Hog 160 Rotary Cutter is 25 to 40 HP.
What is the cutting width of the Bush Hog 160 Rotary Cutter?
Answer: The cutting width of the Bush Hog 160 Rotary Cutter is 60 inches.
What is the recommended cutting height range for the Bush Hog 160 Rotary Cutter?
Answer: The recommended cutting height range is 2 to 12 inches.
What is the maximum PTO speed for the Bush Hog 160 Rotary Cutter?
Answer: The maximum PTO speed is 540 RPM.
What category of three-point hitch is required for the Bush Hog 160 Rotary Cutter?
Answer: The Bush Hog 160 Rotary Cutter requires a Category I three-point hitch.
How often should the gearbox oil be checked or changed?
Answer: The gearbox oil should be checked every 8 hours of operation and changed after the first 50 hours, then every 250 hours thereafter.
What type of oil is recommended for the gearbox?
Answer: Use SAE 90 EP gear oil for the gearbox.
How much oil does the gearbox hold?
Answer: The gearbox holds approximately 1.5 quarts of oil.
How often should the blade spindle be greased?
Answer: The blade spindle should be greased every 8 hours of operation.
What type of grease should be used for lubrication points?
Answer: Use No. 2 lithium-based grease for all lubrication points.
How do I adjust the cutting height on the Bush Hog 160 Rotary Cutter?
Answer: Adjust the cutting height by repositioning the tailwheel and the tractor’s three-point hitch.
What is the maximum diameter of material the Bush Hog 160 Rotary Cutter can cut?
Answer: The maximum diameter of material that can be cut is 1 inch.
What should I do if the blades become dull or damaged?
Answer: Sharpen or replace the blades as needed. Always follow safety instructions when servicing blades.
How do I store the Bush Hog 160 Rotary Cutter for the season?
Answer: Clean all debris from the unit, lubricate all grease fittings, touch up paint on bare metal, and store in a dry location.
What is the correct torque specification for blade bolts?
Answer: Tighten blade bolts to 450 ft-lbs.
How do I check the gearbox oil level?
Answer: Remove the oil level plug on the side of the gearbox; oil should be level with the bottom of the plug hole.
What should I do if the PTO shaft vibrates excessively?
Answer: Stop operation and inspect the PTO shaft for damage or improper alignment.
What safety precautions should be taken during operation?
Answer: Keep bystanders at least 300 feet away, always disengage PTO and shut off tractor before servicing, and ensure all shields are in place.